Twinzer Design/Experiment.

NCJohn

Well-Known Member
Oct 27, 2015
698
1,159
Wilmington, NC
As my muse would say. “ Why add a anchor “ just adds drag and not needed.
If you’re thinking the C5 design from Rusty you need to incorporate the whole design and move the fin clusters and size of fins.
After get my Jobson out on some proper wave, I am beyond stoked on the speed and hold of it. No need for a center fin
I would agree most of the time but the tail on my Ghostbuster is so wide and flat that a little drag for control would give it a little more versatility maybe? The board definitely has speed to bleed!
 

jonbiz

Well-Known Member
Jan 11, 2016
377
551
Wilmington NC
I would agree most of the time but the tail on my Ghostbuster is so wide and flat that a little drag for control would give it a little more versatility maybe? The board definitely has speed to bleed!
What kind of control are you after? I’m thinking you’re not getting the hold, when pushed hard? Might just be a finning issue post a picture of fins in board have some ideas
 

Camel Rock

Well-Known Member
Mar 23, 2020
143
287
San Diego
Please pics of egg
that is what’s next on the list and about that size
ride report and nuances please
Here you go!

Screen Shot 2021-11-17 at 1.49.36 PM.png


Screen Shot 2021-11-17 at 1.51.23 PM.png


IMG_0576.jpg


IMG_0529.jpg


IMG_0533.jpg
 

Attachments

  • Screen Shot 2021-11-17 at 1.49.36 PM.png
    Screen Shot 2021-11-17 at 1.49.36 PM.png
    440.6 KB · Views: 16
  • IMG_0576.jpg
    IMG_0576.jpg
    71.5 KB · Views: 11
  • IMG_0529.jpg
    IMG_0529.jpg
    39.5 KB · Views: 11
  • IMG_0532.jpg
    IMG_0532.jpg
    31 KB · Views: 14
  • Screen Shot 2021-11-17 at 1.51.23 PM.png
    Screen Shot 2021-11-17 at 1.51.23 PM.png
    508.2 KB · Views: 17




Top