Thanks for all the replies and feedback. Greatly appreciated.
Anyone riding twin tabs (FCS) quads on a wider tailed egg, pin or similar shape?
I like the reduced surface area of the McCallum set, but consider some controllers or perhaps even some speed dialers.
I typically ride a 7”-8.5” fin in my big boards 10’-11’. My 7” greenough 4a is works pretty damn well. I would say 7.5” Skip, 4a or similar would work well and should contrast your current setup?
Have you experimented with fin placement and bringing the fin forward an inch or so?
I take my 8'2" Mabile Twinzer + 1 Eggstacy out in a lot of different conditions, but prefer it in 3-4 to a couple feet overhead. It works fine in smaller stuff with the extra foam, but prefer a board in the 9'+ range for extra paddle power.
Depending on the viscosity, you can use pipettes for small does. Climatizing the epoxy to room temps or warmer should also help loosen the material, but will decrease working time.
Weight works great, but ensure that you know the density of the resin and the hardener and stick to the mfg mixing...
I currently have a custom order with Michael Miller for a 6'10" Gypsy with 5 fin setup (FCS). I am pretty set on some Thruster variations, but want to ask you guys for input of quad fin options.
For reference, board is 6'10" x ~21 1/2˝ x ~3". I am 5'10" and about 165 lbs ± a...
Had this pretty cool Larmo that I got from Mr Christmas ( RIP and tons of appreciate for the boards over the years). 9’8” or 9’10” ish. Similar to a magic with fuller rails and double bump/wing, Christmas tail. Had pretty rad Jenson fins, where the front were bigger twin like and the back...